Our BV FH40 marine steel material, CCS AH32 shipbuilding steel plates stock and specification (mm): 14.5*2450*5410, 14.5*4180*7500, 25.5*4210*6870, 14.5*2950*6570, 15.5*2200*7080, 15*2200*6720, 13*2190*8000, 21.5*1500*5480, 20.5*1500*6530, 11*2060*7550, 25.5*4230*7020, 16.5*2020*6180, 23*4210*5620, 23*4160*7310, 15*2430*11560, 15*2180*6720, 18.5*2450*7990, 11*3070*9200, 18.5*2800*7180, 23*3800*7100, 13*2610*8190, 13*1600*6900, 28*2330*5420, 17.5*2440*6220, 12.5*1630*5000, 13*1600*7390.
The weldability of BV FH40 marine steel material is good. It means that under certain process and construction conditions, BV FH40 marine steel material can obtain good performance after welding. Weldability is a measure of the hot workability of steel. Weldability can be divided into weldability in construction and weldability in use. Weldability in construction refers to the sensitivity of cracking in weld metal and near seam zone, and hardening sensitivity of steel in near seam zone. Good weldability means that under certain welding process conditions, the weld metal and steel near the seam do not produce cracks. Weldability in use means that the mechanical properties of weld and HAZ steel are not lower than those of base metal.
BV FH40 marine steel material, Special thick steel plate cutting needs to be preheated in advance. Some steel plates are prone to cracks after entering the cutting process, sometimes that is because the temperature is too low, and it is necessary to perform pre-heat treatment in advance for such cases. The staff can preheat the steel plates first, so that the temperature of the steel plates will gradually increase, and then the flame gun can be used to cut. The probability of cracks in the cut material is very low, and the quality of the steel plate is also guaranteed.
Leave a Message