ABS F36 hull steel plate,In recent years, in line with the development trend of iron and steel industry at home and abroad, we have accelerated the transformation of development mode, promoted structural adjustment, and formed a rich product series of medium and thick plates, hot rolled steel coils, profiles, steel pipes, etc, which are widely used in automobiles, long-span bridges, railways, machinery, ocean and so on fields Meanwhile, we also provide deep processing for the steel materials,ABS F36 hull steel plate.
The alloying elements of low alloy steel are less than 5%. The low alloy steel is added one or several alloy elements on the basis of carbon steel to improve the performance. Such as manganese, silicon, aluminum, nickel, copper, boron, phosphorus, rare earth, etc. ABS F36 hull steel plate Steel with one or more of these elements will have the advantages of high strength and toughness. Due to the addition of few alloy elements, it is called low alloy high strength steel.ABS F36 hull steel plate
With equipment, technology, production technology, quality supervision and other leading advantages, we are leading in the production of all kinds of high-quality, high-tech medium, extra thick, extra wide steel plate ABS F36 hull steel plate shaped parts. The cutting surface is smooth and clean, the cutting edge is neat, without secondary processing by users, and it can be installed and used directly according to the technical dimensions, with the characteristics of high coincidence rate of positive and negative tolerance and excellent quality. The processed steel products are mainly used in heavy machinery and equipment.ABS F36 hull steel plate
Penetration testing technology is only suitable for detecting surface defects. It uses penetrant to apply on the surface of the steel plate, then wipes the excess penetrant with the cleaning solution, and then smears the developer. The penetrant remaining in the defect is adsorbed by the developing material, so as to observe the shape of the defect and determine the type of defect. This method requires multiple wipes before and after the inspection, the process is more cumbersome, and can not detect internal defects and rough and dirty steel plates.
Chemical composition of Q345D steel plate: C: ≤0.18; Si: ≤0.50; Mn: ≤1.70; P: ≤0.030; S: ≤0.025; Nb: ≤0.07; V: ≤0.15; Ti: ≤0.20; Cr: ≤0.30; Ni: ≤0.50; Cu: ≤0.30; N: ≤0.012; Mo: ≤0.10; Als: ≥0.015. Yield strength (MPa) of Q345D steel plate: ≤16mm: ≥345; 16-40mm: ≥335; 40-63mm: ≥325; 63-80mm: ≥315; 80-100mm: ≥305; 100-150mm: ≥285; 150-200mm: ≥275; 200-250: ≥275; 250-400: ≥265. Tensile strength of Q345D low alloy steel: 450-630(MPa). Elongation: ≥21. Impact test: -20 ℃: ≥34.
Before delivering our hot rolled plate product we apply various tests to check the quality of carbon steel plates such as- mechanical test, chemical test, hardness test, toughness test, eddy current test, impact test, micro test, flaring test, flattening test, etc We are provided best packing for structural steel plates to avoid rust Our after-sales service team will contact you if you have any question,ABS F36 hull steel plate.
Leave a Message